English 
فارسی 
Product features
Copper extracting material CLX984 is a localized example of the latest model of Lix and Acorga solvent extracting solutions. The work of preliminary studies and laboratory production of this product was started in 2014 with the cooperation of Shahid Bahoner University of Kerman and Sarchesheme Copper University by the founding board of this company. The industrial production of this extractive oil, which is used in the copper hydrometallurgy process (leaching and solvent extraction process), officially started in 2015. This product is used as the main and strategic material in the bioleaching and leaching process.
Until now, most of the small and large copper cathode production units and factories in the country have used this product by leaching and bioleaching methods and are fully satisfied with the quality of the product produced by this company. Due to its good quality and high efficiency, this product has been able to be better than foreign samples and Mextral984 in many parameters.
Among the advantages of this copper separating solution used in the solvent extraction (SX) method, the following can be mentioned:
1- High absorption rate and even better than foreign samples from PLS solution.
2- The amount of loading and saturation at the highest level,
3- The amount of release (strip) and transfer of copper is excellent.
4- Selectivity of Cu/Fe,
5- Lack of chemical absorption of manganese
The problem of many factories producing copper cathode by leaching method is the removal of disturbing iron and manganese ions. The high selectivity of this product causes that in the PLS solution, copper is separated from common impurities such as iron, manganese, etc. in the best possible way, and finally copper cathode is produced with the highest standard and quality.
6- Minimum separation time of absorption and strip
Absorption kinetics, phase transfer speed and separation and reaction time of this product are very favorable and optimal.
7- No formation of undesirable impurities
Advantages of using domestically produced material:
The existence of a competitive price and lower than the similar foreign product,
production continuity
Instant and timely delivery time,
easy access
Free advice on all types of product grades and models
The possibility of personalizing the product according to the customer's system
It has caused this product to find its place in the Iranian market in this short period of time, and during this time it has attracted all copper cathode producers along with other activists in this field in our country.
For the convenience of our dear customers, the names of the production models of this company are the same as LIX or Acorga. In terms of structure and chemical composition, these models are completely similar to LIX, Mextral, Chemorex and Acorga CP150 brands, but in its production process, creativity, innovation and special innovations have been used, which makes this product special.
Chemical composition of copper extracting oil (CLX5640):
Two solvent groups, aldoxime and ketoxime, which are soluble in esters and special solvents, are used for copper extraction. These additives are added to this product to increase the strength of stripping and release and to optimize viscosity, density and other physical properties. Finally, to use CLX5640, CLX5774 and CLX984 products, it is necessary to dilute these products with volume ratios between 10 and 15% in petroleum distillates (such as Crozen).
Characteristics of the organic phase including Copper Leaching Extractant (CLX5640) and diluting petroleum solution:
This phase cannot be mixed with the aqueous phase (including water, sulfuric acid, etc.).
The appropriate viscosity for mixing and pumping is between 0.01 and 0.02 (Kg/m.s).
This knowledge-based product, whose production development plan has been introduced as a national plan by the honorable vice president for science and technology, is a mixture of aldoxime and a hydrocarbon ester or high flash point. Since aldoxime alone is a very strong solvent, it needs to be combined with a hydrocarbon ester. The use of this ester is to increase the stripping power (release) of the CLX5640 copper separator solution in the solvent extraction process.
Applications of this product:
Application for initial charging of S.X. systems,
Application for daily or monthly injection (Make up),
Application in the bioleaching process as an initial charge and daily injection.
Application in recovering copper from industrial wastewaters (which have large amounts of copper ions),
Application in the extraction of copper from sludges obtained from electroplating.
The reaction of this substance with copper ion is given below:
2ROH(org) + Cu2+(aq) <–> (RO)2Cu(org) + 2H+(aq)
Purchase tonnage and type of packaging:
The amount of packaging depends on the amount of the customer's purchase as follows:
Amounts below 200 kg in 20 kg gallons
Amounts above 200 kg and tonnage in 200 kg barrels
Tonnage values can also be presented in 1000 liter tanks.
All packages are sealed by the company and delivered to the customer.
Product purchase
To buy this product, get more information and get advice, contact the experts of this collection.
